- High quality, accurate 3D prints perfect for professional applications
- Print using two filaments at once - one for the model, one for a soluble support
- Easily remove the support structure with the included DSS Station
- Simple-to-use, Plug&Play desktop printer
- Range of materials supported
- Z-Suite software to support quality design and printing
A 3D printer designed for professional use:
With its consistent, highly accurate print quality, and unique technology allowing you to print using two different materials, the Zortrax Inventure is perfect for professional use and intricate designs. The included Z-Suite software helps to guarantee quality prints every time.
Dissolvable Support System
The Zortrax Inventure incorporates a unique design, using a single extruder to feed two different filaments through two nozzles. This enables you to print using one filament for the model and another soluble filament for support structures. The soluble filament can then be easily removed by the DSS Station - simply submerge the finished print in water inside the DSS Station, rinse and dry. The Z-Suite software allows to to create highly accurate, complex designs by automatically generating support structures for your 3D design, which you can manually edit.
The included Z-Suite software is packed with features to enable you to transform your idea into the perfect design. It can automatically convert 3D files into models ready to print, identify potential problems such as walls that are too thin before printing, and allow you to adjust the durability of your finished print.
Safe and controlled 3D printing:
The Zortrax Inventure features an almost fully sealed, enclosed print chamber to protect your print and give you control over the print conditions. At the same time, the built-in HEPA filter catches more than 99% of printing emissions, including ultra fine particles, meaning you can rest assured that you are printing in a safe environment.
The Zortrax Inventure supports the use of a range of dedicated Zortrax filaments including Z-PETG, Z-PLA, Z-SEMIFLEX, Z-ULTRAT Plus (model filaments), Z-SUPPORT (support filament) and Z-Support Plus (support filament for Z-ULTRAT Plus). The smart cartridges are fitted with a special chip to monitor how much filament is left and notify you of colour and material, ensuring reliable printing. Using cartridges also means replacing filament is easier and faster.
Using the Zortrax Inventure, you can experiment with various materials to meet different industrial requirements. Create complex designs and detailed models, and print end-use parts, functional prototypes and objects with high precision and durability for accurate pre-production testing. You can even use Z-Suite to stack models, printing several at once separated by the support material to reduce printing time.
What's in the box?
Zortrax Inventure 3D Printer
- 3D printer
- SD card
- Cartridge with model material
- Cartridge with support material
- Quick start guide
- Waste container
- Cartridge knob
- Power cable
- Build tray (spare)
- 5 build trays
- DSS Station
- Rising basket
- Rubber gloves
- Drain pipe
- Power cable
- Quick start guide
*Some PVA filaments contain components that are not soluble in water. Any residue left on the model after removing it from the DSS Station can be removed using the included brush.
*Please note an extra charge may applied for any location over 20 miles from Cornwall when adding training.
|Technology||LPD Plus – advanced technology with DSS system|
|Build volume||135 x 135 x 130 mm |
5.5 x 5.5 x 5.3 in
|Wall thickness||Minimal: 400 microns |
Optimal: 800 microns
|Resolution of single |
|in XY axis: 400 microns, |
in Z axis: 90-200 microns
|Material diameter||1.75 mm (0.069 in)|
|Nozzle diameter||0.4 mm (0.015 in)|
|Minimum single |
z-axis single step
|Extruder maximum temperature||380°C (716°F)|
|Ambient operation temperature||15°-35°C (60°-95°F)|
|Storage temperature||0°-35°C (32°-95°F)|
|Support||Dissolvable – printed from a different material than the model|
|Chip with information |
about material (type,
|Extruder||Printing with the main |
and the support material
|Connectivity||SD Card (included)|
|AC input||110/240V ~ 2 A 50/60 Hz|
|Power requirements||24 V DC @ 7 A|
|stl .obj .dxf .3mf|
|Mac OS X / Windows 7 |
and newer versions
|Dimensions||350 x 350 x 400 mm |
13.7 x 13.7 x 15.7 in
22.5 kg (49.6Ibs)